XLPE FRLS LSZH Cable
FRLS CABLE, LSZH CABLE Cu(Al)/XLPE/CTS(STA)/PVC If you don´t find a suitable cable, we will design it for you acc. to your individual requests.
Classification:
Telephone:+86-13523009770
Product Introduction
Fire-resistant Cable,Fire-resistant Flame-retardant Cable
Application:
Fire resistant flame retardant cable sheaths are design to resist combustion and limit the propagation of flames.it is suitable for power transmission and distribution line with rated voltage 300/500V, 450/750V, 0.6/1kV.Due to relative low cost, fire retardant cables are widely used as fire survival cables.Fire resistant cables are often used to maintain circuit integrity of those vital life safety systems such as fire alarm and suppression services.
Property:
Fire resistant cables are designed to maintain circuit integrity of those vital emergency services during the fire. The individual conductors are wrapped with a layer of fire resisting mica/glass tape which prevents phase to phase and phase to earth contact even after the insulation has been burnt away. The fire resistant cables exhibit same performance even under fire with water spray or mechanical shock situation.
Fire Rated Cables:
1.Flame Retardant - designed for use in fire situations where the spread of flames along a cable route needs to be retarded.
2.Fire Resistant (FR) - cables are designed to maintain circuit integrity of those vital emergency services during the fire.
3.Low Smoke and Fume (LSF) - burns with very little smoke and fumes compared to standard PVC, fumes may contain halogens.
4.Low Smoke Zero Halogen (LSZH) cable - when burns there is very little smoke and fumes (compared to standard PVC the fumes contain no halogens.
5.Alternative names for LSZH - LSZO (Low Smoke Zero Halogen), 0HLS (Zero Halogen Low Smoke), LSHF (Low Smoke Halogen Free).
Construction:
|
Conductor |
Class 1 solid or class 2 stranded copper conductor according to BS EN 60228 |
|
Separator |
Mica/glass fire barrier tape |
|
Insulation |
LSZH (Low Smoke Zero Halogen) or XLPE |
|
Protective Conductor |
Tinned copper, full size CPC |
|
Bedding |
LSZH (Low Smoke Zero Halogen) |
|
Screen |
AL/PET (Aluminum/Polyester Tape) |
|
Armour |
SWA (Steel Wire Armor), STA (Steel Tape Armor) |
|
Sheath |
LSZH (Low Smoke Zero Halogen) or HOFR (Heat and Oil Resistant and Flame Retardant) to BS7655 or Heat resistant XLPE |
|
Sheath Color |
Red, white, black |
|
Operating Temperature |
-25°C to +90°C |
Flame Retardant Cables
The flame retardant cable is mainly featured in low liability of fire or that second combustion is only limited to a certain range, meets the IEC 60332 combustion testing requirements, it can be categorized into category A, B, C and D. Flame retardant cable highly recommended to use on the places with flame retardant requirement like oil and gas mining. Flame retardant can be applied to the cable group as follows :
|
Cable Type |
LV Cable |
MV Cable |
HV Cable |
Control Cable |
Instrument Cable |
|
Single Core + copper screen |
- |
Yes |
Yes |
- |
- |
|
+ armor |
Yes |
Yes |
|||
|
Three Core + copper screen |
- |
Yes |
- |
- |
- |
|
+ armor |
Yes |
- |
- |
- |
|
|
1-5 cores non armor or with armor |
Yes |
- |
- |
- |
- |
|
6-61 cores non armor or with armor |
- |
- |
- |
Yes |
Key words:
XLPE FRLS LSZH Cable
Related Products
Product inquiry
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Contact Information
Telephone:+86-13523009770
Mailbox:export@hfjtcable.com
Address: industrial agglomeration area of gongyi city
Copyright©Hongfeng Cable Co., Ltd.
This site already supports IPV6 Powered by www.300.cn
SAF Coolest v1.3.1.1 设置面板 EYSSX-ZTJF-TVSFE-ZED
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page