Single-Multi-Core XLPE PVC Armoured Cable-STA SWA AWA
Low Voltage armoured and Medium Voltage armoured cables manufactured in accordance with British, European and International standards and specifications.
Classification:
Telephone:+86-13523009770
Product Introduction
APPLICATION
These include low voltage and medium voltage SWA steel wire armour cable, and all sizes of these widely used armoured power cables with current ratings up to 35kV. For single core cables, aluminium wire armour - AWA - is used to prevent induced current in the armour. Armoured power cables are available with both copper and aluminium conductors as required.
The armour provides additional protection where mechanical stress has the potential to cause damage to the cable, such as direct burial, outdoors or underground. The armour also enables the cable to withstand higher pulling loads. It should be noted, however, that the armour provides no protection for climatic conditions.
Armoured cables are often referred to as steel wire armoured cables, SWA cable, mains power cable, single core power cable, and multi-core booklet armoured cable.
Armoured Control Cable,450/750V Control Cable
Control cable are suitable for the wiring of electric controlling equipments and instrument, monitoring and controlling return circuit ,electrical protection and measurement in power distribution unit under the circumstance that the rated voltage is up to 450/750 AC.
Qingzhou Cables' range of armoured cable is available with a Copper (Cu) or Aluminium (Al) conductor and with a Polyvinyl Chloride (PVC) or Low Smoke Zero Halogen (LSZH) sheathing, LSZH sheathings are recommended for use in high density enclosed areas, and are mandatory in some public places.
ARMOURED CABLE CONSTRUCTION
Typically, the construction of an aluminium or steel wire armored cable comprises six components:
Conductor: plain stranded copper or aluminium
Insulation: materials such as cross-linked polyethylene (XLPE) provide high temperature resistance and excellent dielectric strength-providing enhanced electrical properties.
Bedding: a layer to create a protective barrier between the insulation and the armour.
Armour: a steel or aluminium armour provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Sheath: the constituent parts of the cable are held together by a sheath offering a further level of protection. Black sheaths can be carbon-loaded for UV stability.
Voltage: voltage ratings of 600/1000V, 1.9/3.3KV, 6.35/11kV and 19/33kV.
XLPE insulated Armored Power Cable
|
0.6/1kV XLPE Insulated Unarmoured/Armoured Cable |
Core |
Armor |
|
Cu or Al/XLPE/PVC Power Cable |
Single Core |
No |
|
Cu or Al/XLPE/AWA/PVC Power Cable |
Single Core |
AWA |
|
Cu or Al/XLPE/PVC Power Cable |
Two Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
Two Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
Two Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
Three Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
Three Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
Three Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
3+1 Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
3+1 Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
3+1 Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
Four Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
Four Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
Four Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
4+1 Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
4+1 Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
4+1 Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
Five Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
Five Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
Five Cores |
SWA |
|
Cu or Al/XLPE/PVC Power Cable |
3+2 Cores |
No |
|
Cu or Al/XLPE/STA/PVC Power Cable |
3+2 Cores |
STA |
|
Cu or Al/XLPE/SWA/PVC Power Cable |
3+2 Cores |
SWA |
Get price list by E-mail:info@qingzhou-cable.com
PVC insulated Armored Power Cable
|
0.6/1kV PVC Insulated Cable |
Conductor |
Insulation |
Armor |
Outer Sheath |
|||||
|
Aluminum |
Copper |
PVC |
SW |
ST |
DST |
AW |
PVC |
PE |
|
|
Cu/PVC/PVC |
P |
P |
--- |
--- |
--- |
--- |
P |
||
|
Cu/PVC/PE |
P |
P |
--- |
--- |
--- |
--- |
P |
||
|
Al/PVC/PVC |
P |
P |
--- |
--- |
--- |
--- |
P |
||
|
Al/PVC/PE |
P |
P |
--- |
--- |
--- |
--- |
P |
||
|
Cu/PVC/STA/PVC |
P |
P |
--- |
P |
--- |
--- |
P |
||
|
Cu/PVC/STA/PE |
P |
P |
--- |
P |
--- |
--- |
P |
||
|
Al/PVC/STA/PVC |
P |
P |
--- |
P |
--- |
--- |
P |
||
|
Al/PVC/STA/PE |
P |
P |
--- |
P |
--- |
--- |
P |
||
|
Cu/PVC/DSTA/PVC |
P |
P |
--- |
--- |
P |
--- |
P |
||
|
Cu/PVC/DSTA/PE |
P |
P |
--- |
--- |
P |
--- |
P |
||
|
Al/PVC/DSTA/PVC |
P |
P |
--- |
--- |
P |
--- |
P |
||
|
Al/PVC/DSTA/PE |
P |
P |
--- |
--- |
P |
--- |
P |
||
|
Cu/PVC/SWA/PVC |
P |
P |
P |
--- |
--- |
--- |
P |
||
|
Cu/PVC/SWA/PE |
P |
P |
P |
--- |
--- |
--- |
P |
||
|
Al/PVC/SWA/PVC |
P |
P |
P |
--- |
--- |
--- |
P |
||
|
Al/PVC/SWA/PE |
P |
P |
P |
--- |
--- |
--- |
P |
||
|
Cu/PVC/AWA/PVC |
P |
P |
--- |
--- |
--- |
P |
P |
||
|
Cu/PVC/AWA/PE |
P |
P |
--- |
--- |
--- |
P |
P |
||
|
Al/PVC/AWA/PVC |
P |
P |
--- |
--- |
--- |
P |
P |
||
|
Al/PVC/AWA/PE |
P |
P |
--- |
--- |
--- |
P |
P |
||
|
Armor material : SW=steel wire, ST=steel tape, DST=double steel tape, AW=aluminum wire |
|||||||||
Get price list by E-mail:info@qingzhou-cable.com
|
Voltage rating for Armoured Cable |
No. x Nominal Cross Section of Conductor No. x mm² |
|||||||
|
1 core |
2 core |
3 core |
3+1 core |
4core |
3+2 core |
4+1 core |
5 core |
|
|
0.6/1 kV & 1.9/3.3KV
|
1x4 mm² |
2x4 mm² |
3x4 mm² |
3x4 mm² + 1x2.5mm² |
4x4 mm² |
3x4 mm² + 2x2.5mm² |
4x4 mm² + 1x2.5mm² |
5x2.5 mm² |
|
1x6 mm² |
2x6 mm² |
3x6 mm² |
3x6 mm² + 1x4 mm² |
4x6 mm² |
3x6 mm² + 2x4 mm² |
4x6 mm² + 1x4 mm² |
5x4 mm² |
|
|
1x10 mm² |
2x10 mm² |
3x10 mm² |
3x10 mm² + 1x6 mm² |
4x10 mm² |
3x10 mm² + 2x6 mm² |
4x10 mm² + 1x6 mm² |
5x6 mm² |
|
|
1x16 mm² |
2x16 mm² |
3x16mm² |
3x16 mm² + 1x10 mm² |
4x16 mm² |
3x16 mm² + 2x10 mm² |
4x16 mm² + 1x10 mm² |
5x10 mm² |
|
|
1x 25 mm² |
2x 25 mm² |
3x 25 mm² |
3x25 mm² + 1x16mm² |
4x25 mm² |
3x25 mm² + 2x16mm² |
4x25 mm² + 1x16mm² |
5x16 mm² |
|
|
1x35 mm² |
2x35 mm² |
3x 35 mm² |
3x35 mm² + 1x16mm² |
4x35 mm² |
3x35 mm² + 2x16mm² |
4x35 mm² + 1x16mm² |
5x25 mm² |
|
|
1x50 mm² |
2x50 mm² |
3x 50 mm² |
3x50 mm² + 1x25mm² |
4x50 mm² |
3x50 mm² + 2x25mm² |
4x50 mm² + 1x25mm² |
5x35 mm² |
|
|
1x70 mm² |
2x70 mm² |
3x 70 mm² |
3x70 mm² + 1x35mm² |
4x70 mm² |
3x70 mm² + 2x35mm² |
4x70 mm² + 1x35mm² |
5x50 mm² |
|
|
1x95 mm² |
2x95 mm² |
3x 95 mm² |
3x95 mm² + 1x50mm² |
4x95 mm² |
3x95 mm² + 2x50mm² |
4x95 mm² + 1x50mm² |
5x70 mm² |
|
|
1x120 mm² |
2x120 mm² |
3x 120 mm² |
3x120mm² + 1x70mm² |
4x120 mm² |
3x120mm² + 2x70mm² |
4x120mm² + 1x70mm² |
5x95 mm² |
|
|
1x150 mm² |
2x150 mm² |
3x 150 mm² |
3x150mm² + 1x70mm² |
4x150 mm² |
3x150mm² + 2x70mm² |
4x150mm² + 1x70mm² |
||
|
1x185 mm² |
2x185 mm² |
3x 185 mm² |
3x185mm² + 1x95mm² |
4x185 mm² |
3x185mm² + 2x95mm² |
4x185mm² + 1x95mm² |
||
|
1x240 mm² |
3x 240 mm² |
3x240mm² + 1x120mm² |
4x240 mm² |
3x240mm² + 2x120mm² |
4x240mm² + 1x120mm² |
|||
|
1x300 mm² |
3x 300 mm² |
3x300mm² + 1x150mm² |
4x300 mm² |
3x300mm² + 2x150mm² |
4x300mm² + 1x150mm² |
|||
|
1x400 mm² |
||||||||
|
1x500 mm² |
||||||||
MEDIUM VOLTAGE CABLES
Cross-sectional area: generally 35mm² up to 100mm²
Number of cores: generally one or three
Solid or stranded aluminium conductors: for applications requiring a lighter cable weight, also often more economical due to lower aluminium prices.
Stranded copper conductors: for applications requiring a smaller overall diameter and higher transmitting properties.
Bedding: Bonded or strippable out semi-conducting layer
Water tightness: longitudinal, longitudinal + quasi-radial, longitudinal + radial
Insulation layers (conductor screen, insulation and insulation screen): XLPE, which is more commonly used for MV cables, or EPR which is more flexible and often better suited to marine and offshore applications.
Metallic screen: to nullify the electric field outside the MV cable. Concentric copper wire screens, Aluminium foil laminate, or extruded lead alloy sheath.
Twisted three-core cable or triplex
Armouring: for mechanical protection. Aluminium wire armoured for single-core cables, Galvanised steel wire armour, strip or tape.
Tapes: Separator tapes to facilitate peeling, water-swellable tapes to prevent water ingress, Conductive tape for core binding.
Outer Sheath: compounds with various properties, tailored to the specific application's requirements, including resistance to oils, greases, rodents, termites, UV and flame, as well as zero halogen emissions.
|
British Standard MV cables |
Voltage Rating |
||
|---|---|---|---|
|
BS6622 - standard British MV cable |
6.35/11kV |
19/33kV |
|
|
BS7835 - LSZH British MV cable |
6.35/11kV |
19/33kV |
|
|
European standard MV cables |
Voltage Rating |
||
|
N2XSH / N2XSEH - single or multicore XLPE insulated with LSZH oversheath |
12/20kV |
||
|
N2XSY - single copper core XLPE insulated with PVC oversheath |
6/10kV |
12/20kV |
18/30kV |
|
N2XS2Y - single copper core XLPE insulated with PE oversheath |
6/10kV |
12/20kV |
18/30kV |
|
NA2XSY - single aluminium core XLPE insulated with PVC oversheath |
6/10kV |
12/20kV |
18/30kV |
|
NA2XS2Y - single aluminium core XLPE insulated with PE oversheath |
6/10kV |
12/20kV |
18/30kV |
|
N2XSEY - 3 copper core XLPE insulated with PVC oversheath |
6/10kV |
||
|
N2XS(F)2Y - single copper core XLPE insulated with water blocking powder and PE oversheath |
6/10kV |
12/20kV |
18/30kV |
|
N2XS(FL)2Y - single copper core XLPE insulated with water blocking powder and aluminium tape tightly bonded to PE sheath |
6/10kV |
12/20kV |
|
|
NA2XS(F)2Y - single aluminium core XLPE insulated with water blocking powder and PE oversheath |
6/10kV |
12/20kV |
18/30kV |
|
NA2XS(FL)2Y - single aluminium core XLPE insulated with water blocking powder and aluminium tape tightly bonded to PE sheath |
6/10kV |
12/20kV |
18/30kV |
|
NYFGY - copper 3 core PVC insulated and sheathed cable |
|||
EUROPEAN MV CABLE TYPE DESIGNATION
|
N |
MV cable according to DIN VDE 0276 |
|
A |
Aluminium (Al) conductor |
|
[blank] |
Copper (Cu) conductor |
|
2X |
Cross-linked polyethylene (XLPE) insulation |
|
S |
Screen of copper wires and copper tape, helically wound |
|
SE |
Screen of copper wires and copper tape over each individual core, helically wound |
|
Y |
Polyvinyl Chloride (PVC) sheath |
|
2Y |
Polyethylene (PE) sheath |
|
(F)2Y |
Longitudinal water tightness with PE sheath |
|
(FL)2Y |
Longitudinal and transversal water tightness with Al/PE sheath |
MV CABLE SIZES
Our 10kV, 11kV, 20kV, 30kV and 33kV cables are available in the following cross-sectional size ranges. Larger sizes are available upon request.
|
10kV single core |
35mm² to 500mm² |
|
10kV 3-core |
35mm² to 240mm² |
|
11kV single core |
50mm² to 1000mm² |
|
11kV 3-core |
35mm² to 400mm² |
|
20kV single core |
50mm² to 500mm² |
|
30kV single core |
50mm² to 500mm² |
|
33kV single core |
70mm² to 1000mm² |
Key words:
Single-Multi-Core XLPE PVC Armoured Cable-STA SWA AWA
Related Products
Product inquiry
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Contact Information
Telephone:+86-13523009770
Mailbox:export@hfjtcable.com
Address: industrial agglomeration area of gongyi city
Copyright©Hongfeng Cable Co., Ltd.
This site already supports IPV6 Powered by www.300.cn
SAF Coolest v1.3.1.1 设置面板 EYSSX-ZTJF-TVSFE-ZED
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page